Door roller catches are the perfect alternative to mortice latches. Mortice latches require a door handle to retract the latch, while roller catches only crave you lot to pull or push the door to open information technology. Roller catches are ideal to be used on kitchen cabinets and cupboard doors, built-in wardrobe doors, or whatever other door which uses a push or pull handle.

Adjustable roller catches feature an easy to conform take hold of with a screwdriver. An opening on one side of the roller allows you to adapt the catch projection to either reduce it or to extend it. Adaptable roller catches are very helpful when at that place is a considerable gap between the door and the door frame.

At Ironmongery Experts, nosotros have bachelor a wide range of styles and sizes of door catches for yous to choose from. For this reason, matching your own home décor is easy. Additionally, we supply magnetic catches which ensure internal doors and cupboard doors remain shut and close gently.

Our best-selling roller catch is the heavy-duty satin stainless steel adjustable roller catch, which is perfect to keep a multifariousness of doors and drawers airtight to prevent them from popping open. This catch is easy to install and adjust with a screwdriver; and volition match other stainless steel or chrome door furniture for an overall neater and tidy appearance. Continue reading our guide below to larn how to install a roller take hold of.

Materials

  • Drill
  • Roller Catch
  • Screws
  • Pencil
  • Tape
  • Spirit level

Instructions

Step one. With a pencil mark the location yous want the catch to be attached to the door. Use a spirit level to ensure that the catch is perfectly level. And then, use a pencil to mark the corners and screw holes.

Step 2. Drill a hole in the door for the body of the catch and for the spiral holes. Insert the catch and make sure it's in line with the screw holes. Check that the catch is perfectly level once more, once the screws take been securely fitted.

Step iii. With the help of a tape mensurate and spirit level fit the catch keep, also known as the strike plate, opposite to where the roller catch is. Mark the spiral holes with a pencil and make sure that the catch keep lines-up with the catch properly. Then, drill the screws in the screw holes. (Annotation: if you lot are replacing your old door take hold of, remember to remove the one-time catch keep from the door likewise before closing the door. Otherwise, you lot could have trouble getting out).

Step 4. Push the door gently to bank check the compression of the catch. If the grab is hitting the take hold of keep and not closing, y'all'll have to arrange it and reduce the catch projection. Once you've done this, and the door is endmost fine - you lot're washed!

In case you have whatsoever enquiries regarding our roller catches or any other ironmongery product, feel free to contact us on 01376 557 561 or electronic mail us at info@ironmongeryexperts.co.uk.

Disclaimer

At Ironmongery Experts nosotros strongly advise that yous always take rubber precautions into consideration when undertaking a DIY project. We besides strongly suggest that you closely read and follow the instructions provided by the manufacturer of any building materials, products or tools you use for your projects.

Nosotros try our all-time to provide articulate and correct instructions within our articles, so you tin can hands complete any DIY project y'all desire. Yet, please note that the information we provide should simply be used every bit a guideline and that some information inside the text may not be entirely accurate.

When using our articles for information and advice, please note that is your own responsibility to determine your capabilities when undertaking and executing the task you wish to complete.

Before starting a DIY task, we strongly recommend that you educate yourself of whatsoever existing building, gas, water and electrical works regulations. We believe it is in your best involvement to complete further research and/or contact the necessary professional torso should y'all have any further concerns.

We besides strongly recommend that a qualified tradesperson completes the relevant safety tests and checks on any DIY you lot accept completed.