How To Install A Wall Urinal

Installer's Guide: How To Install A Urinal

Once you lot've decided on a urinal (or urinals) for your venue, it's time for the 'fun' part: installation. Urinal installation can be a tricky business, and in that location's certainly no shame in calling a plumber if y'all're not confident you can practise it yourself; however, near anyone can install a urinal with the right planning and preparation.

If you're still non certain whether to go for a trough or bowl, vitreous china or stainless steel, then y'all may want to check out our buyer's guide to urinals. Otherwise, read on to discover the ins and outs of urinal installation.

Planning

Before plumbing in your urinal, y'all'll need to spend some time thinking almost mounting heights. There are no hard and fast rules governing this consequence, simply nosotros usually recommend the post-obit:

Adults only: 660mm
Children (secondary school historic period): 560mm
Children (primary school age): 500mm
Infants: 430mm

The higher up measurements refer to the height between the flooring and the forepart lip of the urinal. If you've opted for individual bowl urinals and your venue caters to mixed historic period groups, you can install them at different heights.

Cistern height

The cistern that supplies water to your urinal or urinals should be mounted between 1800mm and 2000mm from flooring level to the underside of the cistern. The flush pipe provided with your urinal volition normally be sized to adjust the ideal mounting acme for your cistern.

Preparation

Before you commence piece of work, it'south important to brand sure that y'all have all of the necessary tools and materials to hand. Every urinal and venue is unlike, simply every bit a minimum you'll need:

- A hammer
- A wrench
- A screwdriver
- Nails
- Caulk
- Wall brackets (for wall mounted urinals)
- Pipework (this should be supplied with your urinal)
- The urinal
- The cistern

Installation

For wall hung urinals, screw the mounting brackets into the wall then slide the unit of measurement down onto them securely. Then employ the fixing holes at the bottom to secure the urinal to the wall. For floor standing urinals, use the fixing holes on the flanges to fix the unit to the wall. Ensure that the top edge of the urinal is level.

1. The supplied urinal waste matter should be fitted to the outlet pigsty in the channel of the urinal; this can then be connected to an appropriately sized trap and and then to your waste piping.

2. Connect the flush pipe to the urinal'due south inlet stub pipe with a compression fitting.

3. Install the automobile syphon into the hole at the bottom of the cistern.

4. The cistern should be secured to the wall using advisable wall fixing. Make sure that the cistern is level. Connect the flush pipe to the syphon tail using a cap nut and safety 'o' ring; the flush pipe should enter the tail of the syphon by no more than 25mm. The flush piping can be cut to size if necessary.

5. Secure the flush pipe to the wall using downpipe clips.

6. Connect the petcock to your water supply using a proprietary tap connector.

Accessories

If yous've opted for bowl urinals, you can enhance privacy with the use of divider screens. Available in both stainless steel and vitreous china, they unremarkably come supplied with wall brackets or flanges, meaning that they can only be screwed into the wall.

Nosotros too recommend installing a flush controller such as the Marnic Water Watch. Flush controllers use infrared technology to discharge the cistern just when a urinal has been used, thereby reducing water usage (and, in plow, your bills).

Source: https://www.washwareessentials.co.uk/content/installing-urinals

Posted by: sheppardonthe1952.blogspot.com

Share this post